VERY SPECIAL VERSION 4, PHASE II. FEATURES THE SAME OEM POWER METER. AS ON THE REAL NELSON! REAL FIBERGLASS P1 REMOVES, ALUMINUM TUBE HANDLE POWER-PACK PULLS-OUT!
So if you want an Extra Fine and near indistinguishable Reproduction of the Original Version 4 Phase II at a reasonable price, here it is. The last photo in the listing shows a real. Version 4 (Phase II) Brad Nelson.(for reference and not apart of sale). The hand Phaser (P1) is hand laid fiberglass. The socket-end is machined NOT Paint.
The red dot indicates front if resetting your BN Phaser! This P2 body of this finished and assembled prop was cast from VERY high quality casting material. (the same casting material used On-Set for the Hero Phaser props in the 2009 Star Trek Movie; 118,000 psi Flex Mod ASTM-D790, compare to actual Aluminum-1100 at 25,000 psi Flex Mod, the casting part is strong in the extreme).Then crafted and finished, both by hand, to the highest standards with special attention paid to match the detail on the original prop. This prop is a static Phaser that any TOS collector would be proud to showcase.
Included is a Custom Crafted Display Stand. The aluminum and brass parts have been reproduced from actual original parts with high quality machine tools to exacting measurements and tolerances. Were all made to surpass general the requirements of DIN ISO 2768-M fabrication tolerances and are Very high quality.Style, Version 4 (Phase II) Roddenberry. Fiberglass P1 Removes, Aluminum Handle Removes. Real OEM Brad Nelson Power Meter mortised-in Fiberglass P1 and the P1 is on Velcro and removes. Custom Display Stand with engraved plaque is Included in Sale. Some of the metal is so well finished and polished you can shave in it LOL. And no resin-cast parts masquerading as machined parts. Phaser II upper body cast as single unit with; removable tubular aluminum handle on Velcro. Phaser I Fiberglass just like a real Nelson. Version 4 (Phase II), again removable. The TV window is a hand-crafted separate part recessed into mortise for a flawless look and fit. Mortise-Set Aluminum; nozzle, side-turn, trigger, bottom-plate with stainless slotted button head screw, side-rails, lock-plate. Jewel bezel, vintage top-turn knob. Nozzle base set in mortise and into P2 body on ½ diameter aluminum nozzle post for extra durability. Vintage top-turn knob set on aluminum post fitted into drilled hole. Aluminum dial-indicator atop tail at top-turn dial. Flat top jewel inch by inch. Turned and polished acrylic emitter. Painted to match an actual Brad Nelson Phaser in a collectors possession. Make note that only 12 Authentic Phase II Version 4 Brad Nelsons were made for Gene Roddenberry. Power Pack: does not provide any power, this is a static prop with no electronics as were those. Phase II Version 4s made. Complete Phaser 9 wide by 6-1/2 tall by 1-¾ deep.
Phaser II Body 6-½ long by 1-15/16 tall x 1-1/4 thick, handle removes. Phaser I Fiberglass Body 3- long by thick by 1-¾ deep, removes. Display Stand is 5 by 7 by 1 with ¼ diameter aluminum armature about 6 high and 1-½ deep.
The Acrylic base can accept a photograph sandwiched in-between the two layers of acrylic that are secured together with magnets (instructions included with display stand). HISTORY: STARFLEET RESEARCH (AKA BRAD NELSON). Brad Nelson made non-working hand units for individual sale offering either; Version I or, Version II: each version having distinctive prismatic-tape and power-meter combinations. The replica for sale in this listing looks like, and is built like, a Version 4 (Phase II).
In total only 12 Real. Version 4 (Phase II) Units were made for Gene Roddenberry. Previously noted, these were made specifically for Gene Roddenberry. For production in the upcoming Star Trek Phase II TV series, that TV show was cancelled in favor of making motion picture.
Version 4 (Phase II) Year made - 1977. The Phaser and extra hand units were not made with any electronics.
The P1, as well as the pistol handle were removable and attached by Velcro. This Brad Nelson design is very coveted due to the scarcity of the item and the direct tie to Gene Roddenberry. The ONLY way to authenticate a Roddenberry Production Starfleet Research. Version 4 (Phase II) Fiberglass P1. Is to examine the Velcro on the bottom of the unit.
As far as it is known, Velcro was not applied to the Public sale P1 units. Units, copper thread was used to attach the Velcro to the P1 Fiberglass shells and then covered over with black magic marker. If the thread can be spotted, then it is possible it is an authentic Brad Nelson.
The item "Star Trek TOS, BRAD NELSON REPLICA, PHASE II, FIBERGLASS P1, ALUMINUM HANDLE" is in sale since Wednesday, July 29, 2020. This item is in the category "Collectibles\Science Fiction & Horror\Star Trek Collectibles\Other Star Trek Collectibles".The seller is "susannetrek" and is located in Sarasota, Florida. This item can be shipped to United States, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, Sweden, South Korea, Indonesia, South africa, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Bahamas, Israel, Mexico, New Zealand, Singapore, Switzerland, Norway, Saudi arabia, United arab emirates, Qatar, Bahrain, Croatia, Malaysia, Brazil, Chile, Panama, Jamaica, Barbados, Bangladesh, Bermuda, Brunei darussalam, Bolivia, Ecuador, Egypt, French guiana, Guernsey, Gibraltar, Guadeloupe, Iceland, Jersey, Jordan, Cambodia, Cayman islands, Liechtenstein, Sri lanka, Luxembourg, Monaco, Macao, Martinique, Maldives, Nicaragua, Oman, Peru, Pakistan, Paraguay, Reunion, Viet nam, Uruguay, Canada, China, Kuwait. Spock